Eight or thirty-two?

Does your DR3000 have 8Mb or 32Mb memory? The only (correct) way to tell, is to look at the back of the repeater.
Location of the TANAPA label - marked red.
One of the labels (see above) has the repeaters' TANAPA number on it .

If this TANAPA number is one of the following, then the repeater has 32Mb memory:

PMUE3084BAEAA [DR 3000 UHF2 (1-40W)]
PMUE2390CAEAA [DR 3000 UHF1 (25-40W)]
PMUD2091CAEAA [DR 3000 VHF (25-45W)]
PMUD2092CAEAA [DR 3000 VHF (1-25W)]
PMUE3017CAEAA [DR 3000 UHF1 (1-25W)]

MTR3000 repeaters only have 32Mb memory.

The TANAPA number shown in the CPS is truncated (last 3 digits missing) and is not a clear indicator of memory size.


  1. Thanks...

    ...It was just the information I was looking for! Someone tells me that the CPS does not work remotely on the repeaters with 8MB! And now, our repeaters have 32MB but I can not run CPS remotely :-(


    1. I'm glad I was able to help you answering this. If you need assistance with getting IP Remote programming working, may I suggest contacting one of Motorolas' Radio Channel Partners - the contact details can be found here http://bit.ly/12ZG0SJ.

  2. Here is a list of 8MB TANAPAs:

    • PMUE2390AAEAA DR 3000 UHF1 (25-40W)
    • PMUE2390AAE DR 3000 UHF1 (25-40W)
    • PMUE2390BAEAA DR 3000 UHF1 (25-40W)
    • PMUD2091AAEAA DR 3000 VHF (25-45W)
    • PMUD2091AAE DR 3000 VHF (25-45W)
    • PMUD2091BAEAA DR 3000 VHF (25-45W)
    • PMUD2092AAEAA DR 3000 VHF (1-25W)
    • PMUD2092BAEAA DR 3000 VHF (1-25W)
    • PMUE3017AAEAA DR 3000 UHF1 (1-25W)
    • PMUE3017BAEAA DR 3000 UHF1 (1-25W)
    • PMUE3084AAEAA DR 3000 UHF2 (1-40W)

    So if your Super TANAPA is listed here (i.e. in this reply) then you have an 8MB repeater!


Powered by Blogger.